|
|
PA-123-2/2-65
and PA-123-1/2-40 |
|
- Output: 65V, 2,000 VA
- Output: 40V, 750 VA
- DC/Direct-coupled linear output
- Adjustable current limiter
- Full external interlock circuit |
|
|
The PA-123-X/2 amplifiers utilize standard PA-123 output
modules and a CP-123 control panel/preamplifier. The number of output
modules and power supply voltage is varied to match the load requirements.
The PA-123-2/2-65 uses two output modules and full supply voltage. The
PA-123-1/2-40 uses one output module and reduced supply voltage to match
low impedance loads. The 2/2-65 can be configured to supply up to 130
Volts/18 Amps if required for high voltage loads.
A single chassis houses both the power supply as well
as the output module(s) and is designed to mount in a standard 19” rack
panel. |
|
General Specifications |
|
2/2-65 |
1/2-40 |
Output voltage |
65 V rms |
40 V rms |
Output current |
36 A rms |
20 A rms |
Max. cont. dissipation |
1,700 W |
850 W |
Frequency response |
|
DC input:
DC to 10 KHz |
-1 dB |
AC input:
1.0 to 10 KHz |
-1 dB |
Max. voltage gain |
40 dB |
Cooling: |
2-speed
fans, automatic |
CP-123
Control Panel |
Input impedance |
10 k-ohms |
Meters |
|
Volts,
pk |
3 digit
digital meter |
Amps,
rms/pk |
3 digit
digital meter |
Interlock circuit |
N.O./N.C.
switch or TTL |
Maximum Input power |
|
2/2-65 |
3,500
VA |
1/2-40 |
1,750
VA |
Voltage |
208 or
230 Vac, single phase |
Frequency |
48 to
62 Hz |
Dimensions |
10.5"H
x 19"W x 20"D |
Weight |
85 lbs
(38.5 Kg) |
|
Amplifier Options |
CS-123
Current Source chassis |
Rack mount cabinet |
|
|
|
|
|
|
|
|