Home
LW126HF.138-13     
 

The LW126HF.138-13 is a high performance system which incorporates the compact ET-126HF high frequency shaker. This system offers the maximum performance from the ET-126HF shaker without a cooling blower. Full system ratings are available up to 14,000 Hz with reduced operation up to 20,000 Hz. This system is used for both general purpose high frequency testing and transducer calibration requirements. A voltage-proportional-to-output-current output signal is provided for modal test and other applications requiring force monitoring. The larger mounting surface of the ET-126HF easily supports the calibration of most vibration transducers and smaller high frequency assemblies and components for general purpose testing not requiring high acceleration testing. The shaker can support relatively heavy loads and is perfectly matched to the amplifier, which makes this the most versatile system of its size.

 
General Specifications
Sine force 13 lbs force pk
Random force 8.0 lbf rms random
Shock force 21 lbf pk shock
Frequency Range: DC to 14,000 Hz
(Useable to 20,000 Hz)
Maximum Acceleration: 37g pk, bare table
24 g pk, 0.2 lb. load
9.6 g pk, 1 lb. load
Maximum Displacement: 0.75 inch pk-pk, bare table
Cooling: Amplifier: forced air
Shaker: natural convection
Power Requirements: 1,000 VA @ 100, 110, 200, 220, or 240V, single phase 50/60 Hz
System Components
ET-126HF-1 Electrodynamic Shaker
PA-138 Linear Power Amplifier
Interconnect Cables and Hoses
 
System Options
SC-121 Sine Servo Controller
SG-135 Manual Sine Controller
Rack Cabinet
Accelerometer Package
CB-152 Cooling Vacuum
#