The LW126HF.141-20 is a high performance system which makes good use of the compact ET-126HF high frequency shaker performance. This system offers full performance up to 14,000 Hz with operation at up to 7 lbf to 20,000 Hz. This system is used for both general purpose testing and transducer calibration requirements. The larger mounting surface of the ET-126HF easily supports the calibration of larger vibration transducers and smaller high frequency assemblies and components for general purpose testing. The shaker can support relatively heavy loads and is perfectly matched to the amplifier, which makes this the most versatile system of its size.

General Specifications
Sine force 22 lbs force pk
Random force 8 lbf rms random
Shock force 21 lbf pk shock
Frequency Range: DC to 14,000 Hz
(20,000 Hz @ 7 lbf)
Maximum Acceleration: 57 g pk, bare table
36 g pk, 0.2 lb. load
15 g pk, 1 lb. load
Maximum Displacement: 0.75 inch pk-pk, bare table
Cooling: Amplifier: forced air
Shaker: cooling vacuum
Power Requirements: 3,000 VA @ 200, 220, or 240V*, single phase 50/60 Hz
System Components
ET-126HF-4 Electrodynamic Shaker
PA-141 Linear Power Amplifier
CB-152-126 Cooling Vacuum and Hose Assembly

Interconnect Cables and Hoses

*100V, 110V operation requires optional step up transformer.

System Options
SC-121 Sine Servo Controller
SG-135 Manual Sine Controller
Rack Cabinet
Accelerometer Package